Blower Motor Control Module Replacement

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Blower Motor Control Processor (LHD)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the right sound insulator. Refer to Instrument Panel Insulator Replacement - Right Side . Remove the electrical connectors from the blower motor control processor.
1	Blower Motor Control Processor Screw NOTE: Refer to Fastener Notice . Tighten: 9 N.m (80 lb in)
2	Blower Motor Control Processor

Callout

Component Name

Preliminary Procedure

Remove the right sound insulator. Refer to Instrument Panel Insulator Replacement - Right Side .
Remove the electrical connectors from the blower motor control processor.

Blower Motor Control Processor Screw

NOTE: Refer to Fastener Notice .

Tighten: 9 N.m (80 lb in)

Blower Motor Control Processor