LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2012 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1583 (Hybrid Engine Electrical System) >> Repair Instructions >> Battery Current Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2010 GMC Sierra and 2010 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Negative Battery Cable Clip & Current Sensor
    GM1968028Courtesy of GENERAL MOTORS CORP.
  1. Squeeze the negative battery cable branches together.
    2. NOTE: Ensure the battery current sensor is installed in the correct direction and location on the negative battery cable.
  2. Slide the NEW battery current sensor (2) up onto the negative battery cable to the location previously marked during removal.
  3. Wrap electrical tape around the battery current sensor leg in order to secure the sensor to the negative battery cable.
  4. Install the negative battery cable clip (1) to the cable to the location previously marked during removal.
  5. Install the negative battery cable. Refer to Battery Negative Cable Replacement .
scientia non olet · About LEMON Manuals