LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2012 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1758 (Object Detection System - Park Assist System) >> Diagnostic Information and Procedures >> Side Object Sensor Malfunction >> Circuit/System Verification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Verification

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON, verify the scan tool can communicate with right side object sensor.
    • If the scan tool can not communicate with the right side object sensor, refer to Right Side Object Sensor Malfunction below.
  2. Verify the scan tool can communicate with left side object sensor.
    • If the scan tool can not communicate with the left side object sensor, refer to Left Side Object Sensor Malfunction below.
  3. Ignition ON, verify that the side blind zone alert system indicators located in the outside rearview mirrors briefly turn ON and then turn OFF during the system self test.
    • If both indicators do not briefly illuminate during the system self test, the side blind zone alert system has been disabled. Refer to Diagnostic Aids above.
    • If only one indicator does not briefly illuminate during the self test, refer to Side Object Indicator Malfunction below.
scientia non olet · About LEMON Manuals