Side Object Sensor Bracket Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Side Object Sensor Bracket

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Raise the Vehicle. Refer to Lifting and Jacking the Vehicle Remove the bumper fascia. Refer to Rear Bumper Fascia Replacement (Avalanche, Cadillac EXT) , Rear Bumper Fascia Replacement (All Utility, Cadillac ESV) .
1	Side Object Sensor Bracket Nuts (Qty: 3) CAUTION: Refer to Fastener Caution . Tighten: 6 N.m(53 lb in)
2	Side Object Sensor Bracket Procedure Disconnect the electrical connectors.

Callout

Component Name

Preliminary Procedure

Raise the Vehicle. Refer to Lifting and Jacking the Vehicle
Remove the bumper fascia. Refer to Rear Bumper Fascia Replacement (Avalanche, Cadillac EXT) , Rear Bumper Fascia Replacement (All Utility, Cadillac ESV) .

Side Object Sensor Bracket Nuts (Qty: 3)

CAUTION:

Refer to Fastener Caution .

Tighten:
6 N.m(53 lb in)

Side Object Sensor Bracket
Procedure
Disconnect the electrical connectors.