Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Coil Spring And The Upper Insulator

Courtesy of GENERAL MOTORS CORP.

Install the coil spring and the upper insulator.
Raise the rear axle.
Install the lower shock absorber retaining nut and bolt to the rear axle. Refer to Shock Absorber Disposal .
Install the stabilizer shaft link to the frame. Refer to Stabilizer Shaft Link Replacement .
Connect the ESC sensor, if equipped. Refer to Electronic Suspension Rear Position Sensor Link Assembly Replacement .
Remove the rear axle support.
Lower the vehicle.