Scan Tool Data Definitions: Inputs

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2003 GMC Savana Special, 2003 GMC Savana Camper Special, 2003 GMC Savana, 2003 Chevrolet RV Cutaway, and 2003 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

Accessory: The scan tool displays the position of the ignition switch. The scan tool displays On when the ignition switch is in the ACCESSORY, RUN or CRANK position.

Cargo Door Ajar Switch: The scan tool displays Off when the cargo door is fully closed or On when the left rear door is open or ajar.

Courtesy Lamp Switch: The scan tool displays the position of the courtesy lamp switch. The scan tool displays Active when the switch is turned ON. The BCM uses this data in controlling the operation of the courtesy lamps.

Driver Door Ajar Sw.: The scan tool displays Off when the driver door is fully closed or On when the door is open or ajar.

DRL Disable Switch: The scan tool displays the position of the DRL disable switch. The scan tool displays On when the switch is activated requesting the BCM to override the normal DRL activation inputs and deactivate the DRL.

Flash to Pass Switch: The scan tool displays the position of the flash to pass switch. The scan tool displays On when the switch is pulled to activate the high beams momentarily while the switch is held.

Headlamp Switch: The scan tool displays the position of the headlamp switch. The scan tool displays Active when the headlamp switch is in the ON position. The BCM uses this data in controlling the operation of the headlamps.

High Beam Switch: The scan tool displays the position of the high beam switch. The scan tool displays On when the switch is used to activate the high beams.

Ignition Unlock: The scan tool displays the position of the ignition switch. The scan tool displays Yes when the ignition switch is not in the locked position.

Interior Lamp Defeat Switch: The scan tool displays the position of the courtesy/dome lamp override switch. The scan tool displays On when the switch is activated requesting the BCM to override the normal interior lamp activation inputs and deactivate the interior lighting.

Key in Ignition: The scan tool displays Yes when the key has been inserted into the ignition switch. The scan tool displays No after the key has been removed.

Park Brake Switch: The scan tool displays the position of the park brake pedal. The scan tool displays Set when the park brake is engaged closing the switch. The BCM uses this data in controlling the operation of the park brake indicator, the reminder chime feature and the DRL system.

Park Lamp Switch: The scan tool displays the position of the park lamp switch. The scan tool displays Active when the park lamp switch is in the ON position. The BCM uses this data in controlling the operation of the park lamps.

Passenger/Rear Cargo Do: The scan tool displays Closed when the door is fully closed or Ajar when the door is open or ajar.

Run/Crank: The scan tool displays the position of the ignition switch. The scan tool displays On when the ignition switch is in the RUN or CRANK position.