Installation Procedure
WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Use the outer flange of the ball joint in order to press the ball joint into place.
- Install the ball joint using a press.
- Place the lower control arm a bench vise.
- Using a punch, install the crimps to the ball joint, if necessary. Use the replaced ball joint as a reference.
- Install the lower control arm in the vehicle. Refer to Lower Control Arm Ball Joint Replacement
- Install the tire and wheel. Refer to Tire and Wheel Removal and Installation .
- Remove the safety stand and lower the vehicle.
- Verify the wheel alignment. Refer to Wheel Alignment Specifications .