Installation Procedure

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Front Drive Axle Lubricant Drain Plug

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice .

Install the drain plug.
Tighten: Tighten the drain plug to 33 N.m (24 lb ft).
Fill the differential carrier assembly with axle lubricant. Use the correct fluid. Refer to Approximate Fluid Capacities and Sealers, Adhesives, and Lubricants .
Install the fill plug.
Tighten: Tighten the fill plug to 33 N.m (24 lb ft).
Install the engine shield, if equipped. Refer to Engine Shield Replacement .
Lower the vehicle.