LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2012 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 992 (Fixed & MOVEABLE Window Systems) >> Repair Instructions >> Rear Sliding Window Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the rear sliding window motor/module assembly to the vehicle.
    2. Fig 1: View Of Sliding Window Motor Module & Components
    GM1852042Courtesy of GENERAL MOTORS CORP.
  2. Connect the rear sliding window electrical connectors to the motor/module and relays (1).
    3. Fig 2: View Of Regulator & Screw
    GM1852031Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  3. Install the rear sliding window motor/module nuts (2).

    Tighten:  Tighten nut to 10 N.m (89 lb in).

  4. Install the rear sliding window regulator and cables (2) to the motor/module.
  5. Install the bolt (1) to the rear sliding window regulator and cables (2).

    Tighten:  Tighten bolt to 11 N.m (97 lb in).

  6. Install the rear sliding window lower garnish molding. Refer to Rear Window Lower Garnish Molding Replacement (Regular Cab) or Rear Window Lower Garnish Molding Replacement (Ext Cab/Crew Cab w/A48) or Rear Window Lower Garnish Molding Replacement (Ext Cab/Crew Cab w/o A48) .
  7. Inspect the rear sliding window for proper operation.
scientia non olet · About LEMON Manuals