LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2012 >> SRX AWD >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Repair Instructions >> Electronic Parking Brake Control Module Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Block the rear wheels.
  2. Disable the parking brake cable adjuster. Refer to Parking Brake Cable Adjuster Disabling .
  3. Turn the ignition to the OFF position.
  4. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
    5. Fig 1: Identifying Parking Brake Intermediate Cable Nut
    GM2230052Courtesy of GENERAL MOTORS COMPANY
  5. Disconnect the electronic parking brake control module electrical connector.
  6. Disconnect the parking brake intermediate cable nut (1) from the electronic parking brake control module spindle by rotating the nut counterclockwise.
  7. Disconnect the parking brake intermediate cable and position the cable aside.
    8. Fig 2: Identifying Electronic Parking Brake Control Module & Bolts
    GM2230057Courtesy of GENERAL MOTORS COMPANY
  8. Remove the electronic parking brake control module bolts (1).
  9. Remove the electronic parking brake control module assembly.
    10. Fig 3: View Of Parking Bake Control Module Bracket Bolts
    GM2230061Courtesy of GENERAL MOTORS COMPANY
  10. If removing the electronic parking brake control module bracket, remove the electronic parking bake control module bracket bolts (1).
    11. Fig 4: View Of Parking Bake Control Module Bracket
    GM2230063Courtesy of GENERAL MOTORS COMPANY
  11. Remove the electronic parking brake control module bracket (1).
scientia non olet · About LEMON Manuals