LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2013 >> CTS V, 4D Sedan, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls/Fuel - 6.2L - Repair Instructions >> Repair Instructions >> Crankshaft Position Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: Identifying Crankshaft Position (CKP) Sensor/Connector
    GM56592Courtesy of GENERAL MOTORS COMPANY
    WARNING:

    Refer to Battery Disconnect Warning .

  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (Coupe) , Battery Negative Cable Disconnection and Connection (Sedan,Wagon) .
  2. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
  3. Remove the starter. Refer to Starter Replacement (LSA) , Starter Replacement (LF1/LLT) .
  4. Disconnect the crankshaft position (CKP) sensor electrical connector.
    5. Fig 2: View Of CKP Sensor & Bolt
    GM55322Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Clean the area around the CKP before removal in order to avoid debris from entering the engine.

  5. Remove the CKP sensor retaining bolt.
  6. Remove the CKP sensor.
scientia non olet · About LEMON Manuals