Component Testing

Dynamic Test

1. Disconnect the harness connector at the S3 Transmission Shift Lever.
2. Verify the M7 Transmission Shift Lock Control Solenoid Actuator activates by using a 3 A fused jumper to add B + to terminal 4, and ground to terminal 2 of the S3 Transmission Shift Lever connector.
   • If the M7 Transmission Shift Lock Control Solenoid Actuator does not activate. 

     Replace the S3 Transmission Shift Lever.

   • If the M7 Transmission Shift Lock Control Solenoid Actuator does activate. 
3. All OK