Fuse Block Replacement

Fig 1: Fuse Block

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection . Remove the rear compartment floor panel front trim. Refer to Rear Compartment Floor Panel Front Trim Replacement Remove the fuse block cover. Refer to Fuse Block Cover Replacement Remove the positive and negative cable (B+ APM module to battery fuse block) from the fuse block only. Refer to Battery Positive and Negative Cable Replacement (B + APM Module to Battery Fuse Block) , Battery Positive and Negative Cable Replacement (APM Module Ground Cable) .
1	Body Harness Terminal Nut (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten 4.7 N.m (42 lb in)
2	Body Harness Terminal Nut Tighten 4.7 N.m (42 lb in)
3	Fuse Block Procedure Loosen the battery positive post clamp nut and remove the fuse block.