Front View Camera Module Scan Tool Information (with Active Safety System, UGN)
Front View Camera Module Scan Tool Data Parameters
| Parameter | System State | Expected Value | Description |
|---|---|---|---|
| Operating Conditions: Ignition ON/Engine OFF/Lane Departure Warning ON | |||
| System Power Mode | - | Run | The scan tool displays Off, Accessory, Run, Cranking or Undefined. This is the state of the ignition switch. |
| System Voltage | - | Varies | The scan tool displays the system voltage depending of the current battery voltage. |
| Frontview Camera Calibration Status | - | Learn Successful | The scan tool displays Not Learned, Learn in Progress, Learn Successful, or Error. This is the current state of the calibration. |
| Alignment Status | - | Yes | The scan tool displays Not Yes or No. |
| Invalid Signal Received | - | No | The scan tool displays Yes or No. |
| Frontview Camera Learn Mode Status | - | Yes | The scan tool displays Yes or No. |
| Frontview Camera System Status | - | On | The scan tool displays Off or On. |
| Frontview Camera Mode | - | Inactive | The scan tool displays Active or Inactive. |