Circuit/System Verification

Ignition ON.
Verify that DTC B2545 is not set.
- If the DTC is set
  Refer to DTC B2545 .
- If the DTC is not set
Verify the rearview camera has no debris on the lens and that the bezel and bezel seal are not damaged.
- If debris is found on the lens
  Clean the lens. If the lens, bezel, or bezel seal are damaged, replace as necessary.
- If no debris on the lens
Ignition ON, transmission in R.
Verify the backup lamps are illuminated.
- If the backup lamps are not illuminated
  Refer to Backup Lamps Malfunction .
- If the backup lamps are illuminated
Engine running, transmission in R.
Verify a clear rear vision image is displayed on the P17 Info Display Module.
- If a clear image is not displayed
  Refer to Circuit/System Testing.
- If a clear image is displayed
All OK.