Removal Procedure
WARNING:
Do not use a service jack in locations other than those specified to lift this vehicle. Lifting the vehicle with a jack in those other locations could cause the vehicle to slip off the jack and roll; this could cause injury or death.
WARNING:
Refer to Brake Dust Warning .
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
- Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
- Unlock and disconnect the wheel speed sensor electrical connector (1).
- Release the wheel speed sensor harness grommet (1) from the strut bracket.
- Clean the wheel speed sensor mounting area on the steering knuckle of any accumulated dirt and debris.
- Remove the wheel speed sensor bolt (1).
- Remove the wheel speed sensor (1) from the steering knuckle.