Circuit/System Verification
- Ignition ON.
- Verify DTC B395A 4B is not set.
- If the DTC is set
- Program the K157 Video Processing Control Module.
- Verify DTC B395A 4B is not set after programming.
- If the DTC sets after programming, replace the B87 Rearview Camera.
- If the DTC does not set
- All OK.
- If the DTC is not set
- Verify DTC B395A 66 is not set.
- If the DTC is set
Remove the B87 Rearview Camera and reinstall
- If the DTC is not set
- If the DTC is set
- Verify DTC B395A 08 is not set.
- If DTC is set
Refer to Circuit/System Testing
- If DTC is not set
- If DTC is set
- All OK.