LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2017 >> CTS Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Object Detection System And Pedestrian Protection System >> Diagnostic Information and Procedures >> Parking Assist System Malfunction >> Circuit/System Verification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Verification

  1. Ignition ON.
  2. Verify the scan tool Park Assist Switch parameter while pressing and releasing the parking assist switch. The parameter should change between Active and Inactive.
    • If the parameter does not change between Active and Inactive 

      Refer to Circuit/System Testing - Parking Assist Switch Circuit Malfunction.

    • If the parameter changes between Active and Inactive 
  3. Command the Park Assist Switch LED output control On and Off with the scan tool. The parking assist switch indicator should turn On and Off when changing between the commanded states.
    • If the indicator does not turn ON and OFF 

      Refer to Circuit/System Testing - Parking Assist Switch Indicator Circuit Malfunction.

    • If the indicator does turn ON and OFF 
  4. Transmission in R, verify the Engine Control Module (ECM) scan tool Reverse Position Switch parameter is Active.
    • If the parameter is Active 
  5. Transmission in R, verify the scan tool Park Assist System Status parameter displays Enable.
    • If the parameter is not Enabled 

      Refer to Diagnostic Aids to determine the cause.

    • If the parameter is Enabled 
  6. All OK.
scientia non olet · About LEMON Manuals