Fastener Specifications
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Frame-to-Body Reinforcement Bolt | |
|
60 N.m (44 lb ft) |
|
30 Degrees |
| Rear Suspension Front Reinforcement Bolt | |
|
150 N.m (111 lb ft) |
|
30 Degrees |
|
15 Degrees |
| Rear Suspension Support Bolt | |
|
90 N.m (66 lb ft) |
|
180 Degrees |
|
15 Degrees |
| Steering Gear Bolt | |
|
110 N.m (81 lb ft) |
|
160 Degrees |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Drivetrain and Front Suspension Frame Transmission Protector Bolt | 35 N.m (26 lb ft) |
| Front Frame Retaining Bolts | 160 N.m (118 lb ft) |
| Front Transmission Mount Through Bolt | 100 N.m (74 lb ft) |
| Front Wheelhouse Front Liner Bolt | 2.5 N.m (22 lb in) |
| Rear Transmission Mount Through Bolt | 105 N.m (77 lb ft) |
| Rear Wheelhouse Front Liner Fastener | 2.5 N.m (22 lb in) |
| Side Member Reinforcement Fasteners (LFX) | 22 N.m (16 lb ft) |