LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2017 >> XTS Base >> Repair and Diagnosis >> Body & Frame >> Windows >> Fixed And MOVEABLE Window System >> Repair Instructions >> Rear Window Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Install the rear window into the opening. Refer to Adhesive Installation of Rear Windows .
  2. Install the rear window lower seal.
  3. Connect the rear window defogger electrical connectors.
  4. Install the rear window radio antenna connector.
  5. Connect the OnStar® antenna, if equipped.

    Check the radio and OnStar® system to verify reception.

  6. Install the left and right inside body side rear window garnish molding. Refer to Body Side Rear Window Garnish Molding Replacement .
  7. Close the rear compartment lid.
  8. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
scientia non olet · About LEMON Manuals