Fastener Specifications
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Front Lower Control Arm Bushing Bolt (GNA, GNB) | |
|
55 N.m (41 lb ft) |
|
90 - 105 degrees |
| Front Lower Control Arm Front Bolt (GNA, GNB/LF3) | |
|
100 N.m (74 lb ft) |
|
75 - 90 degrees |
| Front Lower Control Arm Front Bolt (GNA, GNB/LFX/LF3) | |
|
100 N.m (74 lb ft) |
|
90 - 105 degrees |
| Front Lower Control Arm Front Nut (GNB/LFX) | |
| Front Lower Control Arm Rear Bolt (GNA, GNB) | |
|
100 N.m (74 lb ft) |
|
75 - 90 degrees |
| Front Shock Absorber Yoke Nut (GNB) | 100 N.m (74 lb ft) |
| Front Stabilizer Shaft Insulator Clamp Bolt (GNA, GNB) | |
|
22 N.m (16 lb ft) |
|
30 - 45 degrees |
| Front Wheel Bearing and Hub Assembly Bolt (GNA, GNB) | |
|
100 N.m (74 lb ft) |
|
60 - 75 degrees |
| Steering Knuckle Bolt @ Front Lower Control Arm (GNB) | |
| Steering Knuckle Camber Adjust Bolt - Upper (GNB) | |
| Steering Knuckle Camber Adjust Nut - Upper (GNB) | |
|
100 N.m (74 lb ft) |
|
45 - 60 degrees |
| Steering Knuckle King Pin Bushing Nut (GNB) | |
|
100 N.m (74 lb ft) |
|
Loosen Both Nuts One Complete Revolution |
|
100 N.m (74 lb ft) |
| Steering Knuckle King Pin Bushing Stud (GNB) | |
| Steering Knuckle Nut @ Front Lower Control Arm (GNB) | |
|
115 N.m (85 lb ft) |
|
120 - 135 degrees |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Front Lower Control Arm Rear Nut (GNA, GNB/LF3) | |
|
100 N.m (74 lb ft) |
|
75 - 90 degrees |
| Front Stabilizer Shaft Link Nut (GNA, GNB) | 65 N.m (48 lb ft) |
| Front Suspension Strut Mount Nut (GNA, GNB) | 55 N.m (41 lb ft) |
| Front Suspension Strut Nut (GNA, GNB) | 70 N.m (52 lb ft) |
| Steering Knuckle Camber Adjust Nut - Lower (GNB) | |
|
115 N.m (85 lb ft) |
|
45 - 60 degrees |
| Steering Knuckle King Pin Bolt (GNB) | 7 N.m (62 lb in) |
| Steering Knuckle Nut @ Front Lower Control Arm (GNA) | 145 N.m (107 lb ft) |
| Steering Knuckle Nut @ Front Suspension Strut Yoke Upper Ball Joint (GNB) | |
|
45 N.m (33 lb ft) |
|
30 - 45 degrees |
| Steering Knuckle Nut @ Strut Assembly (GNA) | |
|
85 N.m (63 lb ft) |
|
60 - 75 degrees |