Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

Battery Negative Cable(3) - Install
Use an open ended wrench to hold the battery sensor ground tab, while tightening the battery negative cable nut.(2)

CAUTION:

Battery Negative Cable Nut(1) - Tighten 12 N.m (106 lb in)
Courtesy of GENERAL MOTORS COMPANY

Battery Negative Cable(2) - Install
Battery Negative Cable Frame Ground Fastener(1) - Install and tighten9 N.m (80 lb in)
Courtesy of GENERAL MOTORS COMPANY

Retainer(3) - Engage[2X]
Battery Negative Cable(2) - Install
Battery Negative Cable Ground Fastener(1) - Install and tighten 22 N.m (16 lb ft)
Perform the battery sensor learn procedure. Battery Sensor Module Learn