Fastener Specifications
WARNING: This page is about a different car, the 2018 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Brake Caliper Piston Dust Boot Seal |
| Brake Caliper Piston Seal |
| Brake Hose Fitting Gasket |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Brake Caliper Bleeder Valve - J55, J56 | 17 N.m (13 lb ft) |
| Brake Caliper Bleeder Valve - J6H | 17-20 N.m (13-15 lb ft) |
| Brake Caliper Bolt - Front | |
|
150 N.m (111 lb ft) |
|
30 Degrees |
| Brake Caliper Bolt - Rear (J6H) | 125 N.m (92 lb ft) |
| Brake Caliper Bracket Bolt - Rear (J55, J56) | |
|
100 N.m (74 lb ft) |
|
25 Degrees |
| Brake Caliper Guide Pin Bolt - Front (J6H) | 33 N.m (24 lb ft) |
| Brake Caliper Guide Pin Bolt - Rear (J55, J56) | 36 N.m (27 lb ft) |
| Brake Hose Fitting Bolt - Front (J55, J56) | 40 N.m (30 lb ft) |
| Brake Hose Fitting Bolt - Front (J56 without F46, JE2) | 52 N.m (38 lb ft) |
| Brake Hose Fitting Bolt - Front (J6H) | 52 N.m (38 lb ft) |
| Brake Hose Fitting Bolt - Rear (J55, J56) | 49 N.m (36 lb ft) |
| Brake Hose Fitting Bolt - Rear (J6H) | 52 N.m (38 lb ft) |
| Brake Rotor Bolt - Front | 10 N.m (89 lb in) |
| Brake Rotor Bolt - Rear | 10 N.m (89 lb in) |
| Front Brake Shield Bolt | 9 N.m (80 lb in) |