Fastener Specifications
WARNING: This page is about a different car, the 2018 Cadillac XT5. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Catalytic Converter Gasket |
| Exhaust Front Pipe Gasket |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Catalytic Converter Heat Shield Bolt | 10 N.m (89 lb in) |
| Catalytic Converter Nut@Exhaust Front Pipe | 58 N.m (43 lb ft) |
| Catalytic Converter Nut@Cylinder Head | 46 N.m (34 lb ft) |
| Exhaust Front Pipe Bracket Bolt | 22 N.m (16 lb ft) |
| Exhaust Front Pipe Nut | 22 N.m (16 lb ft) |
| Exhaust Front Underbody Heat Shield Retainer | 1.5 N.m (13 lb in) |
| Exhaust Intermediate Hanger Bolt | 22 N.m (16 lb ft) |
| Exhaust Rear Muffler Heat Shield Retainer | 1.5 N.m (13 lb in) |
| Exhaust Rear Muffler Rear Hanger | 22 N.m (16 lb ft) |