Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

Battery Negative Cable (3) - Install
Use an open ended wrench to hold the battery sensor ground tab, while tightening the battery negative cable nut. (2)

CAUTION:

Battery Negative Cable Nut (1) - Install - Battery Monitor Module Replacement
Courtesy of GENERAL MOTORS COMPANY

Battery Negative Cable (2) - Install
Battery Negative Cable Frame Ground Fastener (1) - Install and tighten 22 N.m (16 lb ft)
Courtesy of GENERAL MOTORS COMPANY

Retainer (3) - Engage [2X]
Battery Negative Cable (2) - Install
Battery Negative Cable Ground Bolt (1) @ Transmission - Install and tighten 22 N.m (16 lb ft)
Perform the battery sensor learn procedure. Battery Sensor Module Learn