LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2020 >> CT6 V >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Vehicle Access System >> Diagnostic Information And Procedures >> Liftgate Handsfree Sensor Malfunction >> Circuit/System Testing
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Circuit/System Testing

  1. Ignition/Vehicle Off. Disconnect the X2 harness connector at the K171 Hands-Free Liftgate Sensor Control Module.
  2. Test for 0.3 - 0.8 Ω between the B275A Hands-Free Liftgate Sensor - Upper signal circuit terminal 1 and the signal circuit terminal 2.
    • If less than 0.3 Ω or greater than 0.8 Ω 
    • Replace the B275A Hands-Free Liftgate Sensor - Upper
    • Go to next step: If between 0.3 - 0.8 Ω 
  3. Ignition/Vehicle Off. Disconnect the X3 harness connector at the K171 Hands-Free Liftgate Sensor Control Module.
  4. Test for 0.3 - 0.8 Ω between the B275B Hands-Free Liftgate Sensor-Lower signal circuit terminal 1 and the signal circuit terminal 2.
    • If less than 0.3 Ω or greater than 0.8 Ω 
    • Replace the B275B Hands-Free Liftgate Sensor-Lower
    • Go to next step: If between 0.3 - 0.8 Ω 
  5. Replace the K171 Hands-Free Liftgate Sensor Control Module.
scientia non olet · About LEMON Manuals