LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2020 >> Escalade Base, 4WD >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Wheel Speed Sensor Reluctor Ring Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

  1. GM885621Courtesy of GENERAL MOTORS COMPANY

    Install the rear wheel speed sensor ring using the J-45860  tone ring installer (1) and the J-8092  driver handle (2).

  2. Drive the wheel speed sensor ring into the axle housing until the tool bottoms against the tube.
  3. Install the rear axle shaft bearing. Refer to Rear Axle Shaft Bearing Replacement .
  4. Install the rear wheel speed sensor. Refer to Rear Wheel Speed Sensor Replacement .
  5. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
  6. Lower the vehicle.
scientia non olet · About LEMON Manuals