LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2020 >> XT6 Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Programming And Setup) >> Repair Instructions >> K33 HVAC Control Module: Programming and Setup >> Unsuccessful Programming Recovery
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Unsuccessful Programming Recovery

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2020 GMC Yukon XL, 2020 GMC Yukon, 2020 Chevrolet Tahoe, 2020 Chevrolet Suburban, and 2020 Cadillac Escalade ESV. However, it is still accessible from the selected car via links, so may be relevant.

If programming a control module is not successful, perform the following procedure:

  1. Verify the control module, data link connector and programming tool connections are secure and the tool software is up to date.
  2. Ignition - On/Vehicle - In Service Mode
  3. Perform the SPS function: Programming

    Verify the control module programming is successful.

    • If the programming is not successful 
    1. Ignition/Vehicle - Off - For greater than 1 min
    2. Ignition - On/Vehicle - In Service Mode
    3. Perform the SPS function: Programming
      • If the programming is not successful - Replace the component: K33 HVAC Control Module
      • Go to next step: If the programming is successful
    4. All OK.
    • Go to next step: If the programming is successful 
  4. All OK.
scientia non olet · About LEMON Manuals