LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2020 >> XT6 Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Programming And Setup) >> Repair Instructions >> K68 Trailer Lighting Control Module: Programming and Setup >> K68 Trailer Lighting Control Module Programming
April 5, 2026: LEMON Manuals is launched! Read the announcement.

K68 Trailer Lighting Control Module Programming

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2020 GMC Yukon XL, 2020 GMC Yukon, 2020 Chevrolet Tahoe, 2020 Chevrolet Suburban, and 2020 Cadillac Escalade ESV. However, it is still accessible from the selected car via links, so may be relevant.

Do not re-program the K68 Trailer Lighting Control Module unless directed by a service procedure or a service bulletin.

  1. Access the Service Programming System (SPS) and follow the on-screen instructions. Refer to Service Programming System (SPS) .
  2. On the SPS Supported Controllers screen, select K68 Trailer Lighting Control Module - Programming and follow the on-screen instructions.
  3. Clear DTCs after completing the programming procedure.

If the trailer lighting control module fails to accept the program, verify all scan tool and trailer lighting control module connections are secure.

scientia non olet · About LEMON Manuals