Installation Procedure
WARNING: This page is about a different car, the 2023 GMC Hummer EV. However, it is still accessible from the selected car via links, so may be relevant.
UHF Low Energy Remote Control Access Sensor Transceiver (1) - Install
- Secure the retaining tabs.
- Connect the electrical connector.
Connect the wiring harness retainer.
- Headlining Rear Trim Panel (1) - Install
Connect the electrical connector.
- Rear Seat Position Center Reading and Courtesy Lamp (1) - Install
- Apply pressure upward on the rear seat position center reading and courtesy lamp (1) to engage the retaining tabs.