Replace and Program B174W Frontview Camera - Windshield or Reprogram B174W Frontview Camera - Windshield

WARNING: This page is about a different car, the 2021 GMC Sierra 3500 HD and 2021 GMC Sierra 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

To program a replacement or an existing B174W Frontview Camera - Windshield, perform the following procedure:

Access the Service Programming System (SPS) and follow the on-screen instructions.
On the SPS Supported Controllers screen, select B174W Frontview Camera - Windshield Programming and follow the on-screen instructions.
On the SPS Supported Controllers screen, select B174W Frontview Camera - Windshield Configuration and follow the on-screen instructions.
Clear DTCs

NOTE:

After programming, a current DTC may be set in the B174W Frontview Camera - Windshield that is unable to be cleared. This is normal and an indicator that the B174W Frontview Camera - Windshield is in learn mode.

Following B174W Frontview Camera - Windshield replacement and/or reprogramming, the module must be calibrated. Refer to Front View Camera Module Learn .