LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2021 >> XT5 Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 333 (Programming And Setup) >> Repair Instructions >> K69 Transfer Case Control Module: Programming and Setup (NQF) >> Programming an Existing or New Control Module
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Programming an Existing or New Control Module

WARNING: This page is about a different car, the 2021 GMC Sierra 3500 HD and 2021 GMC Sierra 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

To program an existing or new control module, perform the following procedure:

  1. Ignition - On / Vehicle - In Service Mode
  2. Access SPS and follow the on-screen instructions for the control module: K69 Transfer Case Control Module
  3. Perform the SPS function: K69 Transfer Case Control Module - Programming
  4. Perform the SPS function: K69 Transfer Case Control Module - Setup
  5. Clear DTCs.
  6. Perform the scan tool function: Range Actuator Learn

    Refer to: Transfer Case Range Actuator Learn

scientia non olet · About LEMON Manuals