Installation Procedure
- Electrical Connector @ Electronic Suspension Control Module - Connect
Install the electronic suspension control module (1) until it is fully seated into the electronic suspension control module bracket (2) and secured by the tab as indicated.
Electronic Suspension Control Module (2) - Install
- Electronic Suspension Control Module Bracket Nut (1) [3x] - Install and tighten 9 N.m (80 lb in)
Rear Floor Panel Carpet (1) - Install
Quarter Lower Rear Trim Panel - Right Side (1) - Install - Quarter Lower Rear Trim Panel Replacement - Right Side
Quarter Lower Rear Trim Panel - Left Side (1) - Install - Quarter Lower Rear Trim Panel Replacement - Left Side
3rd Row Seat (4) - Install - 3rd Row Seat Removal and Installation
- Program the electronic suspension control module. Control Module References
CAUTION:
Refer to Fastener Caution .