LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 1982 >> S10 Pickup 2.8L Eng VIN B, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Auxiliary Emission Control Systems >> Computer Command Control >> Removal & Installation >> Oxygen Sensor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Oxygen Sensor: Installation

Install new oxygen sensor and torque to 30 ft. lbs. (41 N.m). When installing sensor, do not remove anti-seize compound from threads or add any type of sealant. Reconnect electrical connector. Ensure oxygen sensor boot is 5/16" away from wrench fitting of sensor.

NOTE: Never attempt to reinstall a used oxygen sensor. Reinstallation of sensor without special glass bead thread coating can destroy complete exhaust system.
scientia non olet · About LEMON Manuals