System Check (Road Test)

Perform the following checks with the Cruise Switch On and vehicle speed sensor faster than 25 mph.

1. Depress Set button at the end of the Multi-Function Lever. Car should maintain speed.
2. Hold Set button in foot off accelerator. Car should coast to a slower speed.
3. Release Set button. Cruise Control should engage and hold a slower speed, if the new speed remains above 25 mph.
4. Slide Cruise switch to R/A and hold it there. Car should accelerate.
5. Release Cruise Switch back to On. Car should hold new faster speed.
6. Tap brake pedal. Car should coast slower.
7. Slide Cruise switch momentarily to R/A. Car should accelerate to former set speed. If the car has a manual transmission, repeat steps 6 and 7 by depressing the clutch.
8. While cruising, accelerate, then remove foot from accelerator. Car should coast back to set speed.
9. While cruising, tap Cruise switch to R/A. Car should increase 1 mph for each tap.
10. While cruising, tap Set button. Car should decrease by 1 mph for each tap.
11. Slide Cruise Switch to Off. Cruise Control turns off.