Alignment Specifications: Front
WARNING: This page is about a different car, the 1988 Chevrolet Corsica and 1988 Chevrolet Beretta. However, it is still accessible from the selected car via links, so may be relevant.
WHEEL ALIGNMENT SPECIFICATIONS (FRONT)
| Application | Specification | |||
|---|---|---|---|---|
| Camber in Degrees | ||||
| Fraction | 51/64 +/- 32/64 | |||
| Decimal | 0.8 +/- 0.5 | |||
| Caster in Degrees | ||||
| Fraction | 1 45/64 +/- 1 | |||
| Decimal | 1.7 +/- 1 | |||
| Toe-In in Inches | ||||
| Fraction | 0 +/- 3/64 | |||
| Decimal | 0 +/- 0.047 | |||
| Toe-In in Degrees | ||||
| Fraction | 0 +/- 3/32 | |||
| Decimal | 0 +/- 0.094 | |||
| Toe-Out on Turns | ||||
| Inner | (1) | |||
| Outer | (1) | |||
| Steering Axis Inclination (SAI) | (1) | |||
|
||||