Fuel Evaporation Control (C-3): Notes
NOTE:
On 2.0L, 2.2L & 2.5L engines, no canister purge solenoid is used. Canister is purged by ported vacuum when engine is running above idle. On all other models, one of 2 types of solenoid is used: normally open or normally closed. See CANISTER PURGE SOLENOID IDENTIFICATION table.
CANISTER PURGE SOLENOID IDENTIFICATION
| Application | Solenoid Type |
|---|---|
| 2.0L, 2.2L & 2.5L TBI | N/A |
| 2.3L | Normally Closed |
| 3.1 & 3.4L | Normally Open |
| 3.3L | Normally Closed |
| 3.8L | Normally Closed |
| 4.9L | Normally Closed |
| 5.0 & 5.7L TBI | Normally Closed |
| 5.0L & 5.7L PFI "F" Body | Normally Open |
| 5.7L "Y" Body | Normally Closed |