LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 1991 >> S10/T10 P/U 2WD L4-151 2.5L >> Repair and Diagnosis >> Heating and Air Conditioning >> Control Assembly >> Service and Repair >> Control Assembly and Blower Switch
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Control Assembly and Blower Switch

Air Distribution System Component View:




Control Assembly:




Wiring Harness:




Cable:








REMOVE OR DISCONNECT

1. Negative battery cable.

2. Instrument panel center bezel.

3. Control assembly screws (71).

- Pull the control assembly (70) outward.

4. Vacuum harness (73).

5. Electrical connection (126).

6. Cables (67 and 72).

7. Control assembly (70).

8. Blower switch.


INSTALL OR CONNECT

1. Blower switch to the control assembly (70).

2. Cables (67 and 72).

3. Electrical connection (126).

4. Vacuum harness (73).

5. Control assembly (70) to the instrument panel.

6. Screws (71).

7. Instrument panel center bezel.

8. Negative battery cable.
scientia non olet · About LEMON Manuals