LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 1993 >> Hi-Cube 7.4 N >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Removal & Installation >> Window >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal & Installation: Window: Installation

  1. Install door window glass (230). See Figure . Lower the window into the frame. Push the window forward, then tilt it up, and slide the rear roller into the sash channel. Slide the glass back until the front roller is in line with the notch in the sash channel. Slide the glass rearward into the glass run channel.
    NOTE: Remove any masking or covering.
  2. Install the vent/window run channel assembly. See VENT/WINDOW CHANNEL ASSEMBLY  .
  3. Install the trim panel. See TRIM PANEL  .
scientia non olet · About LEMON Manuals