Except 3.8L VIN L
- Set parking brake, block drive wheels and place transmission in Neutral or Park. Warm engine to normal operating temperature. Turn A/C off (if equipped). Ensure Malfunction Indicator Light (MIL) is off.
- Disconnect Tan/Black Electronic Spark Timing (EST) by-pass connector wire. By-pass connector is located near right front strut tower in engine compartment. On all models, DO NOT
disconnect 4-wire connector at distributor.
- Connect timing light to No. 1 spark plug wire. Check timing and adjust if necessary. See IGNITION TIMING
. Reconnect EST by-pass connector, and clear ECM trouble code.
IGNITION TIMING (DEGREES BTDC @ RPM)
| Application |
Man. Trans. |
Auto. Trans. |
| 3.1L (VIN D) |
10 @ Idle |
10 @ Idle |
| 3.8L (VIN L) |
|
|