Oil Pressure Sensor: Service and Repair

REMOVE OR DISCONNECT
1. Turn the ignition "OFF."
2. The negative battery cable.
3. The fuel pump and engine oil pressure indicator switch electrical connector.
4. The fuel pump and engine oil pressure indicator switch.

INSTALL OR CONNECT
1. Apply 1052080 sealant to the fuel pump and engine oil pressure indicator switch threads.
2. The fuel pump and engine oil pressure indicator switch. Tighten the fuel pump and engine oil pressure indicator switch to 13 Nm (116 in lb).
3. The fuel pump and engine oil pressure indicator switch electrical connector.
4. Turn the ignition "OFF."
5. The negative battery cable.