LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 1996 >> Forward Control 7.4 N >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul - P Series (Diesel) >> Ignition System >> Powertrain Control Module (Pcm) >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Powertrain Control Module (Pcm): Installation

Install PROM in new PCM. See PROGRAMMABLE READ-ONLY MEMORY  (PROM). Install PCM into vehicle. Connect electrical connectors to PCM. Install access panels. Connect negative battery cable.

NOTE: When replacing defective PCM, remove knock sensor module or PROM from defective PCM. New PCM does not come equipped with knock sensor module or PROM (if applicable). Install knock sensor module or PROM into new PCM.
scientia non olet · About LEMON Manuals