Specifications Index
CORVETTE SPECIFICATIONS INDEX
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | |||
| Automatic | A/C SYSTEM SPECIFICATIONS | ||
| Manual | A/C SYSTEM SPECIFICATIONS | ||
| Torque | |||
| Automatic | NA | ||
| Manual | TORQUE SPECIFICATIONS | ||
| Battery | CAPACITIES | ||
| Brakes | |||
| Bleeding Sequence | BLEEDING BRAKE SYSTEM | ||
| Disc Brakes | DISC BRAKE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Charging | |||
| Generator | ON-VEHICLE TESTING | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Drive Belts | |||
| Adjustment | BELT ADJUSTMENT | ||
| Belt Routing | See appropriate illustration under SERPENTINE BELT ROUTING & ALIGNMENT -- CARS | ||
| Engine Cooling | |||
| General Service Specifications | COOLING SYSTEM SPECIFICATIONS | ||
| Radiator Cap Pressure | 15 psi or specification stamped on cap. | ||
| Thermostat R & I | NA | ||
| Water Pump R & I | WATER PUMP | ||
| Engine Mechanical | |||
| Compression | ENGINE COMPRESSION | ||
| Oil Pressure | With engine at normal operating temperature, oil pressure should be at least 6 psi (0.4 kg/cm2 ) at 1000 RPM, 18 psi (1.3 kg/cm2 ) at 2000 RPM and 24 psi (1.7 kg/cm2 ) at 4000 RPM. | ||
| Overhaul | ENGINE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. | ||
| Flywheel/Flex Plate Torque | Tighten bolts evenly using a crisscross sequence. | ||
| Step 1 | 15 Ft. Lbs. (20 N.m) | ||
| Step 2 | 37 Ft. Lbs. (50 N.m) | ||
| Step 3 | 74 Ft. Lbs. (100 N.m) | ||
| Fuel System | |||
| Pressure Specification Ignition ON, engine OFF |
55-61 psi (3.9-4.3 kg/cm2 ) | ||
| Fuel Pressure Test Procedure | FUEL SYSTEM PRESSURE TEST | ||
| Fuel Filter Location and R & I | |||
| Automatic Transmission | REMOVAL PROCEDURE (CORVETTE, AUTO TRANS) | ||
| Manual Transmission | REMOVAL PROCEDURE (CORVETTE, MANUAL TRANS) | ||
| Ignition | |||
| Firing Order & Cylinder Identification | See FIRING ORDER & CYLINDER IDENTIFICATION | ||
| Ignition Wires (Resistance) | NA | ||
| Ignition Wires (Routing) | NA | ||
| Spark Plug | |||
| Type | AC 41-931 | ||
| Gap | Iridium .040 in. (1.04 mm) Platinum .060 in. (1.52 mm) |
||
| Torque | 15 Ft. Lbs. (20 N.m) | ||
| Starting | |||
| Starter | ON-VEHICLE TESTING | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Wheel Alignment | |||
| Adjustment Specifications | WHEEL ALIGNMENT SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Wheel & Tire | |||
| Wheel Lug Nut Torque | 100 Ft. Lbs. (136 N.m) | ||