30-Minute Learn Procedure
WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ignition on, with engine off.
- Attempt to start engine, then release the key to ON position, vehicle will not start.
- Observe the SECURITY indicator light. After about 10 minutes, the indicator light will turn off.
- Turn ignition off and wait 5 seconds.
- Repeat steps 1 to 4 two more times for a total of 3 cycles/30 minutes. Vehicle is now ready to relearn the Passlock(tm) Sensor Data Code and/or passwords on the next ignition switch transition from off to crank.
- Start engine. The vehicle has now learned the Passlock(tm) Sensor Data Code and/or password.
- With a scan tool, clear any DTCs, if needed. History DTCs will self clear after 100 ignition cycles.
NOTE:
The vehicle learns the Passlock(tm) Sensor Data Code and/or password on the next ignition switch transition from off to crank. You must turn the ignition off before attempting to start engine.