LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 1998 >> Metro Base >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Starting System - M/T >> Bench Testing >> Commutator Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Commutator Test

  1. Ensure continuity exists between any 2 commutator segments. If continuity does not exist, replace armature.
  2. Clean commutator segment surfaces with No. 400 grit sandpaper (if necessary). If surface is scored, out-of-round, or pitted, replace commutator.
  3. Using "V" blocks and dial indicator, ensure maximum commutator runout and minimum commutator diameter does not exceed specifications. See STARTER SPECIFICATIONS  table.
  4. Standard undercut depth for insulating mica should be .016-.024" (.40-.60 mm). Minimum mica undercut depth is .008" (.20 mm). If depth is not within specification, replace armature.
scientia non olet · About LEMON Manuals