Control Module HVAC: Service and Repair

A/C Amplifier And Evaporator Case:

Remove or Disconnect

1. Negative (-) battery cable.
2. Pull I/P compartment out while pushing RH and LH stoppers in.
3. A/C amplifier electrical connector.
4. A/C amplifier from evaporator case; unsnap and slide A/C amplifier up and remove from case.

Install or Connect

1. A/C amplifier to evaporator case; slide and snap into place.
2. A/C amplifier electrical connector.
3. Close I/P compartment.
4. Negative (-) battery cable.