Crankshaft Position (CKP) Sensor

CKP sensor utilizes a pick-up coil type sensor mounted on side of engine block. The CKP sensor monitors crankshaft position and sends signals to ignition control module. These signals provide PCM/VCM with a TDC position reference for each piston, as well as supplying an engine speed (RPM) signal. This allows PCM to fire appropriate ignition coil at the proper time, determine triggering of the fuel injectors, and to compute crankshaft position and RPM. CKP sensor signal is also used to detect a cylinder misfire by monitoring changes in crankshaft speed. For additional information, see IGNITION SYSTEM  .