Oil Pressure Sensor: Service and Repair

Engine Oil Pressure Sensor/Switch Replacement

REMOVAL PROCEDURE

TOOLS REQUIRED
J 35749 Oil Pressure Switch Socket

CAUTION: Refer to Vehicle Lifting Caution in Cautions and Notices.

1. Raise the vehicle. Refer to Vehicle Lifting Caution in Cautions and Notices.
2. Disconnect the electrical connector.
3. Remove the engine oil pressure sensor (1) using J 35749.

INSTALLATION PROCEDURE
1. Install the engine oil pressure sensor (1) using J 35749.
2. Connect the electrical connector.
3. Lower the vehicle.