Engine Block Data/Specifications
| Cylinder Bore Limit | 2.9568 | |
| Standard Gasket Surface Distortion | 0.0012 | |
| Maximum Gasket Surface Distortion | 0.0024 | |
| Taper and Out Of Round Limits | 0.0039 | |
| Main Bearing Cap Bore(Without Bearing) | Stamping A | 2.2047-2.2050 |
| Stamping B | 2.2050-2.2052 | |
| Stamping C | 2.2052-2.2054 |