LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2000 >> Astro Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Body Control Modules) >> Programming >> Powertrain Control Module/Programming On Board >> Programming Varification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Programming Varification

WARNING: This page is about a different car, the 2001 GMC Safari and 2001 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. With a scan tool, clear DTCs. Then Attempt to start engine.
  2. Repeat Service Programming procedure if engine does not start or operates poorly. Perform following procedures before programming PCM:
    • Ensure PCM and DLC connections are OK.
    • Ensure Techline(R) operating software is up to date.
    • Ensure calibration part number is correct for vehicle.
  3. Attempt to program PCM. If powertrain control module still cannot be programmed properly, replace PCM. See POWERTRAIN CONTROL MODULE  under REMOVAL & INSTALLATION.
scientia non olet · About LEMON Manuals